Concrete Coring Sydney
Need concrete cored without structural damage, mess, or delay? Smartscan Locators delivers pinpoint core drilling for Sydney’s toughest job sites.
Smartscan Locators drills through concrete for service access, structural changes, and site investigations. We handle rebar-heavy slabs, post-tensioned concrete, footings, and walls without damaging what’s beneath or around. Whether it’s a tight riser shaft or a suspended slab in a live site, our team knows how to get the hole drilled and cleared.
We cut through reinforced concrete to install conduits, anchors, drains, and sample cores for testing. Every job starts with a clear plan: locate services, scan for risks, and drill with the right bit and method. The result is a clean hole, aligned to spec, and ready for the next trade
What Is Concrete Coring and How Does It Work?
Concrete coring is a method used to drill smooth, circular holes through concrete, asphalt, or masonry. It uses a high-speed, diamond-tipped drill that cuts through hard surfaces without cracking or damaging surrounding areas. Water is used during drilling to reduce heat and control dust, and the extracted core is removed cleanly.
Unlike jackhammers or cutting saws, concrete coring is:
- Controlled: Prevents cracking or overbreak
- Targeted: Cuts exactly where needed for cables, pipes, or bolts
- Safe: Avoids damaging rebar, cables, or nearby structures
- Standards-Based: Used across commercial, civil, and structural works
This method is essential when the job calls for service access, sample extraction, or structural drilling, without compromising the slab, wall, or footing.
Why Choose Smartscan for Concrete Coring in Sydney?
Smart Equipment That Gets Through Anything
- Core sizes from 10mm up to 600mm
- Vertical, horizontal, and upside-down drilling
- Drills with minimal vibration and noise
- Wet method used to manage dust and cool equipment
- Cuts through reinforced slabs, walls, footings, and tilt panels
Operators Who Know the Site
- BYDA-certified and trained in underground service protection
- Coring only starts after scanning and locating
- Crews understand structural layouts and site sequencing
- Work is coordinated to fit into existing build timelines
Fully Compliant and Site-Ready
- Utility scans included before coring
- Waste and slurry managed to meet environmental rules
- Covered by all required insurances
- Safety documents, core logs, and reports available on request
Integrated With Early Works Services
- We combine coring with locating, scanning, and NDD
- One team manages all subsurface access without needing multiple contractors
Available When the Project Needs It
- 24/7 service across Sydney metro and regional areas
- Fast mobilisation for shutdowns, emergency works, and night shifts
Services We Offer Under Concrete Coring
We support core drilling needs across construction, engineering, and remediation projects. Below are three of our most requested applications:
Service Penetration Drilling
We drill holes in concrete for service runs, utility connections, and building fitouts. Used for HVAC, plumbing, electrical, and comms, through walls, floors, and suspended slabs.
Core Sampling & Material Testing
Cores are extracted for strength, integrity, or chemical testing. Supports engineers, geotechnical teams, and compliance audits across commercial and civil projects.
Structural Modifications
Openings cut for anchoring, retrofitting, or reinforcing structures. Common for dowels, starter bars, and retrofit anchors in tilt panels or columns.
Common Use Cases for Core Drilling in Sydney
Plumbing and Electrical Service Access
Civil and Structural Slab Works
HVAC and Mechanical Riser Openings
Telecom and Data Cabling Routes
Transport and Infrastructure Projects
Areas We Serve
Need concrete coring outside of Sydney? Our team travels wherever accurate drilling is needed across NSW.
Sydney Metro & Greater Western Sydney
Providing concrete coring across Sydney CBD, Inner West, and Greater Western Sydney for commercial, residential, and infrastructure projects.
Liverpool, Kings Langley, Campbelltown
Servicing sites from Liverpool to Penrith with dependable core drilling for utilities, structural access, and sampling work.
Bankstown, Castle Hill, Camden
Supporting builders and engineers in Bankstown, Castle Hill, Camden, and surrounding suburbs with clean, compliant concrete coring.
Concrete Coring Sydney – FAQs
1. Can you drill through rebar or post-tensioned concrete?
Yes. We always scan first using GPR or EMI tools to identify embedded materials, then drill using rebar-compatible diamond bits.
2. How deep can you core into a concrete slab or wall?
We can drill beyond 1 metre using extension barrels. Depth depends on access and concrete thickness, but deep coring is standard for our rigs.
3. Is scanning required before you start coring?
Yes. Utility locating and concrete scanning are essential before any drilling begins to avoid live services or structural risks.
4. What core sizes do you offer for different applications?
We offer core holes ranging from 10mm to 600mm in diameter, suitable for everything from cable runs to large-diameter structural access.
5. Do you provide concrete coring after hours or during shutdowns?
Yes. We operate 24/7 and support night works, weekends, and emergency callouts, ideal for commercial, rail, and live-site jobs.
6. Can I request reports or logs after coring is completed?
Yes. We can provide documentation including core dimensions, material observations, location data, and supporting SWMS or site records.
7. What types of projects need concrete coring in Sydney?
Common jobs include service penetrations, structural retrofits, anchor bolt drilling, slab testing, and access for utilities or remediation.
Book Your Concrete Coring Service in Sydney Today
Get the job done with accuracy, safety, and a team that understands the demands of your site. Smartscan Locators is ready to support your project with certified technicians, reliable equipment, and a fast, professional approach to concrete coring.
